Frosted Glass Chandelier with walnut body. E26 or E27, 3 or 5 globes, 50 cm rod, indoor and dry locations only.
Safety, read this first
- Switch off the circuit at the consumer unit before you touch any wiring, and make sure nobody can switch it back on while you work. Never work on the lamp with the power on.
- This chandelier is wired directly into the ceiling. In Sweden and Germany that is work for a qualified electrician, not a do it yourself job. Please have it installed by one.
- Check the chandelier for transport damage before you install it. If anything is damaged or missing, do not install it, contact us.
- The globes are glass. Support each one as you fit it and do not overtighten.
- Do not exceed the maximum power marked on the lamp holder. Let the bulb cool before you touch it.
Part 1 · Assemble the chandelier, power off
1
Unpack everything and lay the parts out. Check them against your order and look for transport damage before you start.
2
Take the central column of the chandelier and unscrew it so it comes apart. The arms are fitted from the inside, so the column has to be opened first.
3
Line each arm up with its hole in the column, push it fully home, then fit the screw and tighten it with a spanner. Do the same for every arm.
4
Bring the supply lead out through the hole in the centre of the column and connect it to the wire of each arm.
5
Put the column back together exactly as it came apart, then screw the 50 cm suspension rod onto the top.
6
Fit an E27 bulb into each globe and test the chandelier on the ground, before it goes up. Transport can loosen a connection, and this is the moment to find it. If a globe does not light, stop and contact us. We will send a replacement.
Part 2 · Mount the chandelier, by a qualified electrician
7
Fix the hanging plate to the ceiling with the screws and plugs supplied, then lift the chandelier up to it.
8
Connect live and neutral from the ceiling supply to the matching terminals, one at a time, and wrap each connection with insulating tape. Secure the chandelier to the plate and check that it is tight.
Specifications
| Type | chandelier, semi-flush |
| Globes | 3 or 5 |
| Heights | 40.6 cm and 61 cm |
| Socket | E26 or E27, light source not included |
| Voltage | 110 to 240 V |
| Materials | metal, wood and frosted glass |
| Suspension | 50 cm rod, can be extended on request |
| Dimmable | no |
| Protection class | IP20, indoor, dry locations only |
Need help? Write to info@chandlixshop.shop and quote your order number.
These instructions describe the lamp only. The electrical installation must follow the rules in force in your country and must be carried out by a qualified electrician. Chandlix accepts no responsibility for damage or injury caused by incorrect installation, by installation carried out by a person who is not qualified, or by use outside the specifications above.